Federal Manufactured Housing Reform Opens New Options for Rental Development
Congress removed the 1974 chassis requirement for manufactured homes, setting off a multi-year effort across 30 state capitals to align building codes and zoning laws.
In the quiet industrial yards where factory-built structures take shape, workers assemble wall panels, attach sheetrock, and seal roof trusses using the same standard materials found on conventional construction sites across the country. For five decades, every single residential home built under the federal standard departed the assembly plant fixed to a structural steel subframe. That steel undercarriage, mandated by federal housing regulations established during the Nixon administration, dictated how manufactured homes were moved, placed, and designed across every state in the nation.
This summer, lawmakers altered that structural requirement. With the enactment of the 21st Century ROAD to Housing Act, Congress formally eliminated the 1974 mandate that required every HUD-coded manufactured home to sit permanently on a nonremovable steel chassis. The statutory change removes a physical constraint that long prevented factory-built structures from being easily stacked or integrated into dense, multi-story configurations.
For property owners, land developers, and short-term rental operators evaluating ways to expand hosting capacity, the elimination of the chassis requirement creates new options for off-site modular design. Yet while federal standard-setting has updated, state building codes, municipal land-use rules, and local titling administrative procedures remain anchored to the old standard. Translating the federal change into built property on the ground will require a multi-year statutory overhaul across dozens of state legislatures.
What happened
The passage of the 21st Century ROAD to Housing Act landmarked a significant technical shift in federal housing construction rules. Since 1974, the U.S. Department of Housing and Urban Development, known as HUD, mandated that any structure classified as a manufactured home must be constructed on a permanent, nonremovable steel chassis. That frame remained under the home for its entire operational lifespan, regardless of whether the home was placed on temporary piers or set onto a permanent basement foundation.
Under the new legislation, HUD codes no longer require the inclusion of that nonremovable frame. Factories can now construct HUD-compliant units that are placed directly onto permanent foundation systems, much like traditional site-built structures or modular homes. Housing policy specialists note that dropping the heavy steel subframe lowers manufacturing expenses and simplifies transport and installation.
According to research from the Terner Center for Housing Innovation at the University of California, Berkeley, removing the frame drops the production cost of an individual unit by $5,000 to $10,000. It also removes the physical engineering obstacle that prevented manufactured housing components from being stacked into two-story structures or combined into multi-family residential layouts.
However, the federal law does not automatically rewrite state codebooks. The legislation grants state governments until July 11, 2027—or until 2028 for states whose legislatures meet on a biennial schedule—to certify that state laws treat manufactured homes identically regardless of whether a home includes a permanent chassis. Until state statutes are formally updated, local building inspectors and zoning boards in many jurisdictions will continue to enforce legacy definitions.
The origin of the chassis mandate
To understand why the removal of the chassis rule is significant, one must look at how factory-built housing evolved following World War II. During the mid-twentieth century, mobile homes emerged as a quick, economical form of temporary housing. Because early units were intended to be towed repeatedly behind personal vehicles, they were constructed on heavy wheel-and-axle chassis.
By the 1970s, mobile homes had transitioned into permanent residential structures. Buyers rarely moved them after initial delivery. In response to varying build quality across state lines, Congress passed the National Manufactured Housing Construction and Safety Standards Act of 1974, which established the federally administered HUD code. The statutory framework established federal oversight for structural integrity, fire safety, and energy efficiency. However, the 1974 law retained the requirement for a permanent steel frame, cementing a legal boundary between HUD-standard manufactured homes and local-code modular or site-built housing.
Over the subsequent decades, the permanent frame created practical and regulatory complications. Municipalities began relying on the presence of the visible chassis to segregate manufactured homes into specialized zoning districts, often excluding them from single-family residential neighborhoods. The frame also reinforced legal distinctions between personal property titling and real property real estate records.
Despite these barriers, factory-built housing remained an important component of the national housing stock. Census data indicates an estimated 20 million people in the United States reside in manufactured homes. However, production slowed considerably after a boom in the late 1990s, driven by rising land costs, restrictive municipal zoning, and limited access to conventional mortgage financing.
Factory construction and cost structures
Building a structure inside an enclosed factory offers significant efficiency advantages over outdoor job sites. Indoor manufacturing eliminates weather delays, reduces raw material waste through bulk cutting, and uses standardized assembly procedures. Industry data from the Manufactured Housing Institute indicates that manufactured homes cost approximately 50 percent less per square foot to construct than traditional site-built homes.
The cost baseline for new factory-built housing has adjusted over recent years. According to the U.S. Census Bureau's Manufactured Housing Survey, the average sales price of a new manufactured home was $81,900 in 2019. By 2025, that national average figure had reached $127,200. Even with that increase, factory-built units remain the most affordable form of non-subsidized housing construction in the country.
The steel chassis itself represented a notable share of material expenses. Stephanie Hawke, associate research director of land use and supply at UC Berkeley's Terner Center for Housing Innovation, pointed out that installing a heavy, nonremovable steel frame under a building that will rest permanently on a concrete foundation adds unnecessary expense. Dropping that requirement frees up capital for higher-grade interior finishes or structural engineering adjustments.
Building components indoors also allows for tight quality control. Modern manufactured homes feature drywall, standard insulation packages, architectural shingles, and standard residential windows identical to those used in traditional site-built framing. Dustin Brakemeier, who owns and operates manufactured home communities across Minnesota, South Dakota, and Wisconsin, notes that modern factory units are structurally equivalent to site-built structures once installed, with the principal distinction being the assembly environment.
Stacking units and density on existing lots
The primary architectural constraint imposed by the permanent chassis was structural height. Because the frame was engineered to bear weight from underneath during transport and sit flat on low pier foundations, stacking one manufactured unit directly on top of another was structurally complex and expensive. As a consequence, manufactured housing remained almost entirely limited to single-story, single-family detached layouts.
Without the chassis restriction, factory builders can design units intended for vertical stacking. This opens the possibility of multi-family manufactured development, including two-story duplexes, stacked townhomes, and small apartment layouts. For real estate investors and hosts managing small parcels where land costs are high, adding vertical density without resorting to full site-built construction represents a significant shift in site planning.
Commercial operators in the community housing sector have already begun adjusting site designs around the rule change. UMH Properties, a publicly traded real estate investment trust that owns and manages manufactured home communities across several states, addressed the regulatory change during a 2026 earnings conference call. The company noted that chassis-free construction will allow operators to install two-story units and duplex layouts directly onto existing manufactured housing pads.
“You build 2,000 square feet of homes instead of 1,000 square feet on the same piece of land. It’s a very, very important development. This is a change that’s gonna help every manufactured home community out in the country.”
Where a town allows small apartment buildings or accessory units, a host who can order two-story modules from a factory may add guest space for less per square foot. A host with sufficient lot coverage could place a stacked multi-unit structure in a fraction of the time required for traditional stick-built construction, cutting down on local build disruption and carrying costs.
The state law deadline and legal definitions
Although the federal standard took effect upon enactment of the 21st Century ROAD to Housing Act, practical implementation depends entirely on state-level legislation. In many states, building regulations, motor vehicle codes, and tax statutes explicitly define a manufactured home by referring to the presence of a permanent steel frame or chassis.
Rachel Siegel, a researcher and policy expert with the Pew Charitable Trusts housing initiative, noted that more than 30 states will need to pass corrective legislation to clean up statutory definitions. Because references to a permanent chassis appear across various chapters of state law—ranging from building standards to titling procedures—states cannot simply delete a single clause. They must ensure that state housing agencies recognize chassis-free HUD-code structures as valid manufactured homes.
To avoid a patchwork of conflicting state rules, federal law mandates that states certify compliance with the updated HUD definition before July 11, 2027. States with biennial legislative sessions have until 2028 to complete the process. If a state fails to update its statutes, local building officials may refuse to permit chassis-free HUD units, or state titling agencies may refuse to register them.
Some states have already established mechanisms to adapt automatically to federal changes. North Carolina, Tennessee, and Texas have updated their statutory definitions using incorporation by reference. In these states, the state definition of a manufactured home automatically tracks whatever technical code HUD maintains, allowing immediate adoption of chassis-free designs without requiring new state legislation.
Zoning restrictions and local land use
Beyond state building codes, municipal zoning regulations present a major hurdle for factory-built housing. For decades, local governments used zoning ordinances to restrict where manufactured homes could be placed. Many cities prohibited manufactured units in standard single-family residential zones, restricting them to mobile home parks or rural zones on the outskirts of municipal boundaries.
In an analysis examining over 6,700 zoning districts in Texas, researchers with the National Zoning Atlas found that 33 percent of municipal zoning districts explicitly banned manufactured housing. An additional 11 percent allowed manufactured homes only through conditional use permits or discretionary public hearings, rather than as a permitted by-right use.
Elected officials and park owners have acknowledged the historical stigma associated with factory-built housing. Pennsylvania State Representative Dan Moul, a Republican who owns a manufactured housing community in Oxford Township, Adams County, noted that local zoning boards frequently block expansions due to outdated perceptions of park residents. Similar zoning hurdles have prevented land owners from using high-quality factory units for residential infill.
To address local exclusion, several states have passed preemption legislation. Kentucky and Texas enacted laws prohibiting local municipalities from adopting ordinances that unreasonably restrict manufactured home placements. Kentucky's statute specifically mandates that local governments cannot enforce higher design or architectural standards on HUD-coded manufactured housing than those required for traditional site-built homes. As chassis-free designs begin to resemble site-built homes more closely, industry advocates expect additional states to limit discriminatory local zoning rules.
Titling classification and mortgage financing
Another area impacted by manufactured housing regulations is property titling and mortgage access. Historically, because manufactured homes were built on wheeled chassis, many states treated them as personal property—similar to motor vehicles or recreational vehicles—rather than real property real estate.
When a home is titled as personal property, buyers cannot access traditional 30-year fixed-rate residential mortgages. Instead, buyers must rely on chattel loans, which carry shorter repayment terms and significantly higher interest rates. According to analysis by the Pew Charitable Trusts, financing a $100,000 manufactured home through a conventional real estate mortgage rather than a personal property chattel loan saves a borrower roughly $49,000 in interest over the life of the loan.
Removing the permanent chassis makes it easier for states and lenders to classify manufactured homes as real property from the moment of installation. When a chassis-free unit is set directly onto a poured concrete foundation or basement, it satisfies the physical criteria traditionally required by mortgage underwriters. Alex Rodino, a real estate agent based in Savannah, Georgia, who specializes in factory-built housing, notes that aligning construction quality with traditional mortgage eligibility is essential for broader market acceptance among property buyers and real estate investors.
The other view
While industry advocates and housing researchers champion the elimination of the chassis mandate, municipal planners and neighborhood associations have raised fair questions about rapid adoption. Local government officials often express concern over infrastructure capacity when higher-density multi-family structures are introduced into areas originally planned for single-family homes. Adding two-story factory-built duplexes to existing parcels can strain local water, sewer, and road networks if site infrastructure is not upgraded simultaneously.
Planning officials also emphasize that building safety oversight differs between federal HUD codes and state-adopted international building codes. Traditional modular homes are designed to meet local or state building codes, which are reviewed and inspected by local municipal building officials. In contrast, manufactured homes are inspected at the factory under federal HUD oversight. Some municipal officials argue that allowing stacked multi-family structures under federal HUD codes reduces local building department oversight on structural and fire safety compliance in dense neighborhoods.
Furthermore, legacy park owners and park residents point out that retrofitting older manufactured home communities to accommodate two-story, chassis-free units requires capital expenditure for upgraded foundation pads and utility hookups. Without careful planning, rapid redevelopment of existing parks into higher-density rental units could displace existing residents who own older single-story units.
Implications for rental operators and investors
For short-term rental operators and small-scale real estate developers, the federal rule change alters the math around property expansion. Historically, hosts looking to add an accessory dwelling unit or expand guest accommodations had to choose between high-cost site-built construction or state-coded modular units, which carry higher factory costs and complex local permitting requirements.
Removing the chassis requirement removes a physical barrier that long prevented factory-built housing from expanding beyond single-story detached configurations.
Chassis-free HUD units offer a middle ground. By combining the cost efficiencies of national HUD-code factory production with modern exterior aesthetics, hosts can potentially order off-site guest units that blend into residential neighborhoods while avoiding the high square-foot expenses of traditional construction. The potential to utilize stacked two-story configurations makes this option attractive for urban infill parcels and properties with limited lot footprints.
However, short-term rental hosts must evaluate local regulatory constraints before making capital commitments. Beyond standard building code compliance, hosts must ensure that local zoning laws allow both manufactured housing and short-term occupancy on the subject parcel. In markets where municipal codes ban short-term rentals in multi-family configurations or prohibit manufactured homes outside dedicated parks, the federal statutory change will not alter local operational restrictions.
What to do with this
If you are considering incorporating factory-built housing into your rental portfolio or development pipeline, follow these concrete steps to monitor implementation in your market:
- Check your state's current statutory definition of manufactured housing to confirm whether legislative action is required before July 2027 to recognize chassis-free HUD units.
- Review local municipal zoning ordinances to determine whether manufactured housing is permitted by-right on your property or requires discretionary zoning variances.
- Consult with local utility providers and building departments regarding hookup requirements and foundation standards for stacked or multi-story off-site units.
- Verify with commercial lenders whether chassis-free HUD units qualify for standard real estate mortgage financing in your jurisdiction.
- Confirm that local short-term rental licensing rules permit hosted or unhosted short-term rentals within factory-built or multi-family structures on your lot.
Property owners should consult with qualified attorneys, local planning officials, and financial advisors before undertaking real estate development projects or purchasing factory-built structures.
The standards desk (June Ashby) went over this story: 73 details tested, 69 matched to the source material, 4 kept as general background, nothing cut.
Sources
- Bing News - reported October 21, 2026.
- Magnolia Reporter - Stateline: Cheaper manufactured homes could be having a moment, if only states can catch up | Regional News | magnoliareporter.com.
- The Missoula Current News - Manufactured homes could be having a moment, if states catch up.
Read and analysed by the STR Gazette desk.
STR Gazette is general information for hosts in the United States. It is not legal, tax or financial advice; confirm rules and figures with your city, your state agency or a qualified professional.

What readers say